16 Irvine St / Selections
Prepared for Mastacon · 43 sections
Questions
01a

Bed 3 — the design

The rear downstairs bedroom, designed 1 October 2026: 4.12 × 3.9, a king bed against a full-height oak-clad wall, herringbone floor, and a 3.3 m slider to a covered limestone patio.

The first three pictures are AI-enhanced images, not photographs. The fourth is the model; the fifth is a sample from Touchwood's brochure.

What is what: king bed on a low upholstered base in a terracotta-oatmeal weave, white linen, an oatmeal throw, cream and terracotta cushions, no bedhead (the cladding is the bedhead); Supawood-style grooved oak cladding, full height; travertine ring pendants on black cords; round travertine bedsides; a wool rug under the bed; COREtec 'Lumber' herringbone; white laminate robe with a lit matte black column and an open luggage bay; slim oak lounge chair with oatmeal cushions and an oak side table; sheer + blockout curtains on a matte black track in a ceiling pocket; FARO Klim 150 fan (black, pine blades); black-framed slider. No chrome. Outside the slider: the covered limestone patio and back garden as designed in 09a.

To confirm or price

  • Bed position. The king goes on the east wall, centred on it, with the cladding behind it — on the south wall it would have left only about 500 to the robe. Confirm power and the two pendant points are set out to suit (either side of the bed, about 1.2 m off its centre line).
  • Cladding on the full east wall, 3.9 m × 2730: Supawood grooved Tasmanian oak on black MDF, solid boards, or Touchwood Tasmanian oak on black (the three options are the next questions).
  • Timber cladding: the reference reads as vertical boards about 180–200 mm wide with a fine shadow groove, light warm oak, clear matte, floor to ceiling. Please source and price three options, installed per m², full height (2730), and say who does each:
  • Option 1 — Supawood SUPALINE grooved panels (the closest match found): SUPAVENEER Tasmanian Oak ¼ (quarter-cut, straight grain) on black MDF so each groove reads as a dark shadow line; grooves ~5–6 mm wide at ~190 mm centres, vertical; clear matte; concealed fixing. Supawood, 1800 002 123, info@supawood.com.au — no SA office listed, so ask them for an Adelaide installer. Please get a sample.
  • Option 2 — solid Tasmanian oak lining boards, about 180 mm, square-edged with a shadow gap, clear matte, installed by your carpenter.
  • Option 3 — Touchwood Veneer Panels, Tasmanian Oak on black (Franci sent the brochure, 23 Oct 2026): Tasmanian oak veneer on 9 mm moisture-resistant black MDF, tongue and groove, 1212 mm wide sheets; the black sheets come 2440 or 3040 long, so a 3040 sheet runs the full 2730 with no cross joint (about four sheets a wall). The grooves are a V-joint every 100 mm, showing black: finer than the ~190 mm boards in the reference (about 39 lines across the 3.9 m wall rather than 20), so it reads as narrower boards. The veneer comes raw and is finished on site (clear matte, e.g. a hard wax oil); 8.3 kg/m², fixes straight onto plasterboard, with matching 20 × 10 solid Tas oak mouldings for the corners and ceiling line. touchwoodproducts.com.au. John, 23 Oct 2026: not the preferred option, because the 100 mm grooves are too narrow for the look; options 1 and 2 come first. Price it only as a fallback.
  • Floor: COREtec Naturals Herringbone 'Lumber' 50 LVPEH 804 (Solomons) in this room only, meeting the main floor at the door (a contrast, not a match). Please price it against the tendered herringbone and confirm the threshold detail.
  • Bedroom door to open outwards, or a cavity slider into the south wall, so it clears the chair and bedside. Which do you recommend? Decided (John, 22 Oct 2026): it opens outwards into the hallway, hinged on the east jamb.
  • Robe the same design as Bed 2 (section 02a), on the west wall: white laminate, hinged, long matte black bar handles; a lit open column in matte black laminate (550 wide) at the slider end with a warm LED strip under each shelf on the room's light switch; four doors; and an open luggage bay at the south end, lined in black, with an oak bench and a cushion (removable, washable cover), a drawer under, a black hanging rail and hooks, an LED strip at the top.
  • Curtains in the recessed ceiling pocket over the slider, full wall, black double track (section 03).
AI-enhanced · 1 of 3From the robe corner: the king bed with its head on the east wall, centred on the full-height grooved oak cladding; travertine ring pendants low over round travertine bedsides; the three-panel slider to the covered patio on the left, as the tender's window schedule has it
AI-enhanced · 2 of 3From the door, past the bed to the slider: the robe on the left, its lit matte black column at the slider end; the three-panel slider with curtains stacked clear of the glass at both ends, the patio under the balcony beyond
AI-enhanced · 3 of 3From beside the bed, across to the robe: the open luggage bay (oak bench, robes), four doors and the lit black column; the slim oak lounge chair and side table on the south wall, the three-panel slider on the right
3D model · to scaleThe first view straight from the 3D model. Trust this one for proportions
Manufacturer's sampleCladding option 3: Touchwood Tasmanian Oak on black, from Touchwood's brochure (sent by Franci, 23 Oct 2026). V-joints every 100 mm show the black core. Not John's preferred option: the boards read too narrow. Colours in print are indicative